01-19-2022, 02:27 PM
In response to the guy talking about IEC 60601-2-62:2013-Medical electrical equipment-Part 2-62: Particular requirements for the basic safety and essential performance of high intensity therapeutic ultrasound (HITU) equipment, IEC TR 62981:2017-Studies and comparisons of magnetic measurements on grain-oriented electrical steelsheet determined by the single sheet test method and Epstein test method, IEC 60364-7-729:2007-Low-voltage electrical installations-Part 7-729: Requirements for special installations or locations-Operating or maintenance gangways, I highly suggest this new IEC International Electrotechnical Commission blog or IEC 61181:2007+AMD1:2012 CSV-Mineral oil-filled electrical equipment-Application of dissolved gas analysis (DGA) to factory tests on electrical equipment, IEC 60794-1-403:2021-Optical fibre cables-Part 1-403: Generic specification-Basic optical cable test procedures-Electrical test methods-Electrical continuity test of cable metallic elements, IEC 61099:2010-Insulating liquids-Specifications for unused synthetic organic esters for electrical purposes, and don't forget this new IEC International Electrotechnical Commission url and don't forget IEC 60034-9:2003+AMD1:2007 CSV-Rotating electrical machines-Part 9: Noise limits, IEC 60335-2-31:2012/AMD2:2018-Amendment 1-Household and similar electrical appliances-Safety-Part 2-31: Particular requirements for range hoods and other cooking fume extractors, IEC 61557-3:2019-Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC-Equipment for testing, alongside all this best IEC International Electrotechnical Commission site which is also great. Also have a look at this recommended IEC International Electrotechnical Commission url as well as IEC 60335-2-79:2016-Household and similar electrical appliances-Safety-Part 2-79: Particular requirements for high pressure cleaners and steam cleaners, IEC 60364-7-712:2017-Low voltage electrical installations-Part 7-712: Requirements for special installations or locations-Solar photovoltaic (PV) power supply systems, IEC TS 61200-101:2018-Electrical installation guide-Part 101: Application guidelines on extra-low-voltage direct current electrical installations not intended to be connected to a public distribution network, as well as this useful IEC International Electrotechnical Commission advice as well as IEC 60893-3-5:2003-Insulating materials-Industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3-5: Specifications for individual materials-Requirements for rigid laminated sheets based on polyester resins, IEC 60335-2-27:2019-Household and similar electrical appliances-Safety-Part 2-27: Particular requirements for appliances for skin exposure to optical radiation, IEC 62933-5-2:2020-Electrical energy storage (EES) systems-Part 5-2: Safety requirements for grid-integrated EES systems-Electrochemical-based systems, as well as awesome IEC International Electrotechnical Commission details which is also worth a look. I also recommend this new IEC International Electrotechnical Commission info and don't forget IEC 60811-302:2012-Electric and optical fibre cables-Test methods for non-metallic materials-Part 302: Electrical tests-Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds, ISO 80601-2-13:2011/AMD2:2018-Amendment 2-Medical electrical equipment-Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation, IEC 80601-2-49:2018-Medical electrical equipment-Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitors, on top of this updated IEC International Electrotechnical Commission url as well as IEC 60034-26:2006-Rotating electrical machines-Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors, IEC 60893-3-7:2003+AMD1:2009 CSV-Insulating materials-Industrial rigid laminated sheets based on thermosetting resins for electrical purposes-Part 3-7: Specifications for individual materials-Requirements for rigid laminated sheets based on polyimide resins, IEC 60335-2-15:2012-Household and similar electrical appliances-Safety-Part 2-15: Particular requirements for appliances for heating liquids, on top of updated IEC International Electrotechnical Commission details which is also great. Finally, have a look at this top IEC International Electrotechnical Commission url for good measure. Check more Recommended PDO Threads sarasota Tips 4ff309f
In reply to the guy talking about IEC 61196-1-102:2005-Coaxial communication cables-Part 1-102: Electrical test methods-Test for insulation resistance of cable dielectric, IEC 61290-1-2:2005-Optical amplifiers-Test methods-Part 1-2: Power and gain parameters-Electrical spectrum analyzer method, IEC 60034-18-1:2010-Rotating electrical machines-Part 18-1: Functional evaluation of insulation systems-General guidelines, I highly recommend this cool IEC International Electrotechnical Commission info or IEC 60297-3-109:2015-Mechanical structures for electrical and electronic equipment-Dimensions of mechanical structures of the 482, IEC 60773:2021-Rotating electrical machines-Test methods and apparatus for the measurement of the operational characteristics of brushes, IEC 60335-2-11:2019-Household and similar electrical appliances-Safety-Part 2-11: Particular requirements for tumble dryers, as well as this awesome IEC International Electrotechnical Commission tips and don't forget ISO 80601-2-84:2020-Medical electrical equipment-Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment, IEC 60512-11-1:2019-Connectors for electrical and electronic equipment-Tests and measurements-Part 11-1: Climatic tests-Test 11a-Climatic sequence, IEC 60335-2-34:2012/AMD2:2016-Amendment 2-Household and similar electrical appliances-Safety-Part 2-34: Particular requirements for motor-compressors, as well as this excellent IEC International Electrotechnical Commission forum which is also great. Also have a look at this useful IEC International Electrotechnical Commission info alongside all IEC 60335-2-12:2002-Household and similar electrical appliances-Safety-Part 2-12: Particular requirements for warming plates and similar appliances, IEC 60601-2-63:2012/AMD1:2017-Amendment 1-Medical electrical equipment-Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment, IEC 60809:2014/AMD3:2019-Amendment 3-Lamps for road vehicles-Dimensional, alongside all this useful IEC International Electrotechnical Commission site alongside all IEC/IEEE 62582-6:2019-Nuclear power plants-Instrumentation and control important to safety-Electrical equipment condition monitoring methods-Part 6: Insulation resistance, IEC 60169-1-3:1988/AMD1:1996-Amendment 1-Radio-frequency connectors-Part 1: General requirements and measuring methods-Section Three: Electrical tests and measuring procedures: Screening effectiveness, IEC 60999-1:1999-Connecting devices-Electrical copper conductors-Safety requirements for screw-type and screwless-type clamping units-Part 1: General requirements and particular requirements for clamping units for conductors from 0, on top of excellent IEC International Electrotechnical Commission blog which is also worth a look. I also suggest this awesome IEC International Electrotechnical Commission info on top of IEC 61800-5-2:2016-Adjustable speed electrical power drive systems-Part 5-2: Safety requirements-Functional, IEC 60670-23:2006/AMD1:2016-Amendment 1-Boxes and enclosures for electrical accessories for household and similar fixed electrical installations-Part 23: Particular requirements for floor boxes and enclosures, IEC 61196-1-115:2006-Coaxial communication cables-Part 1-115: Electrical test methods-Test for regularity of impedance (pulse/step function return loss), and don't forget this awesome IEC International Electrotechnical Commission blog on top of IEC 60335-2-101:2002-Household and similar electrical appliances-Safety-Part 2-101: Particular requirements for vaporizers, IEC 61076-8-101:2020-Connectors for electrical and electronic equipment-Product requirements-Part 8-101: Power connectors-Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A, IEC 60255-149:2013-Measuring relays and protection equipment-Part 149: Functional requirements for thermal electrical relays, and don't forget recommended IEC International Electrotechnical Commission link which is also great. Finally, have a look at this best IEC International Electrotechnical Commission tips for good measure. Check more Recommended IEC International Electrotechnical Commission Blog ee744ff
In reply to the guy talking about IEC 61196-1-102:2005-Coaxial communication cables-Part 1-102: Electrical test methods-Test for insulation resistance of cable dielectric, IEC 61290-1-2:2005-Optical amplifiers-Test methods-Part 1-2: Power and gain parameters-Electrical spectrum analyzer method, IEC 60034-18-1:2010-Rotating electrical machines-Part 18-1: Functional evaluation of insulation systems-General guidelines, I highly recommend this cool IEC International Electrotechnical Commission info or IEC 60297-3-109:2015-Mechanical structures for electrical and electronic equipment-Dimensions of mechanical structures of the 482, IEC 60773:2021-Rotating electrical machines-Test methods and apparatus for the measurement of the operational characteristics of brushes, IEC 60335-2-11:2019-Household and similar electrical appliances-Safety-Part 2-11: Particular requirements for tumble dryers, as well as this awesome IEC International Electrotechnical Commission tips and don't forget ISO 80601-2-84:2020-Medical electrical equipment-Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment, IEC 60512-11-1:2019-Connectors for electrical and electronic equipment-Tests and measurements-Part 11-1: Climatic tests-Test 11a-Climatic sequence, IEC 60335-2-34:2012/AMD2:2016-Amendment 2-Household and similar electrical appliances-Safety-Part 2-34: Particular requirements for motor-compressors, as well as this excellent IEC International Electrotechnical Commission forum which is also great. Also have a look at this useful IEC International Electrotechnical Commission info alongside all IEC 60335-2-12:2002-Household and similar electrical appliances-Safety-Part 2-12: Particular requirements for warming plates and similar appliances, IEC 60601-2-63:2012/AMD1:2017-Amendment 1-Medical electrical equipment-Part 2-63: Particular requirements for the basic safety and essential performance of dental extra-oral X-ray equipment, IEC 60809:2014/AMD3:2019-Amendment 3-Lamps for road vehicles-Dimensional, alongside all this useful IEC International Electrotechnical Commission site alongside all IEC/IEEE 62582-6:2019-Nuclear power plants-Instrumentation and control important to safety-Electrical equipment condition monitoring methods-Part 6: Insulation resistance, IEC 60169-1-3:1988/AMD1:1996-Amendment 1-Radio-frequency connectors-Part 1: General requirements and measuring methods-Section Three: Electrical tests and measuring procedures: Screening effectiveness, IEC 60999-1:1999-Connecting devices-Electrical copper conductors-Safety requirements for screw-type and screwless-type clamping units-Part 1: General requirements and particular requirements for clamping units for conductors from 0, on top of excellent IEC International Electrotechnical Commission blog which is also worth a look. I also suggest this awesome IEC International Electrotechnical Commission info on top of IEC 61800-5-2:2016-Adjustable speed electrical power drive systems-Part 5-2: Safety requirements-Functional, IEC 60670-23:2006/AMD1:2016-Amendment 1-Boxes and enclosures for electrical accessories for household and similar fixed electrical installations-Part 23: Particular requirements for floor boxes and enclosures, IEC 61196-1-115:2006-Coaxial communication cables-Part 1-115: Electrical test methods-Test for regularity of impedance (pulse/step function return loss), and don't forget this awesome IEC International Electrotechnical Commission blog on top of IEC 60335-2-101:2002-Household and similar electrical appliances-Safety-Part 2-101: Particular requirements for vaporizers, IEC 61076-8-101:2020-Connectors for electrical and electronic equipment-Product requirements-Part 8-101: Power connectors-Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed connectors with plastic housing for rated current of 40 A, IEC 60255-149:2013-Measuring relays and protection equipment-Part 149: Functional requirements for thermal electrical relays, and don't forget recommended IEC International Electrotechnical Commission link which is also great. Finally, have a look at this best IEC International Electrotechnical Commission tips for good measure. Check more Recommended IEC International Electrotechnical Commission Blog ee744ff